Why do pay more money for ready receivers? Very easy to use this 2.4gHz module. Only connect the wires and fly. Sensitiviy is -90dBm. You-can-do-it

Size: 26x23x3mm

Voltage: 3.2v - 5.5v

Current: 110 mah

RFin: 50 Ohm

Ch1:2414mhz , Ch2:2432mhz , Ch3:2450mhz , Ch4:2468mhz , Ch5:2370mhz , Ch6:2390mhz , Ch7:2490mhz . Ch8:2510mhz

Rx has PCB antenna mount and 2dBi antenna.

 DON'T SEND WITH CABLE (If there is no special request) 

1. 1 Ground
2. 2 Video out
3. 3 Audio out
4. 4 Ground
5. 5 Channel 1
6. 6 Channel 2
7. 7 Channel 3
8. 8 Power +3-5volt
9. 9 Power on (Jumper between 8 and 9)
10. 10 Ground

If you connect 5th. pin (Channel 1) to ground, receiver's frequency will be 2.414 mHz

If you connect 6th. pin (Channel 2) to ground, receiver's frequency will be 2.432 mHz

If you connect 7th. pin (Channel 3) to ground, receiver's frequency will be 2.450 mHz

If you connect 5th. pin (Channel 1) and 6th. pin (Channel 2) to ground, receiver's frequency will be 2.510 mHz

If you connect 5th. pin (Channel 1) + 7th. pin (Channel 3) to ground, receiver's frequency will be 2.490 mHz

If you connect 6th. pin (Channel 2) + 7th. pin (Channel 3) to ground, receiver's frequency will be 2.390 mHz

If you connect 5th. pin (Channel 1) + 6th. pin (Channel 2) +  7th. pin (Channel 3) to ground, receiver's frequency will be 2.370 mHz

If all pins are free , receiver's freguency will be 2.468 mHz (Default channel)